Note that you need to be in either the DEM Module or Terrain Module.
If you are running in the DEM Module, from the DEM Menu select DEM | Import DEM and select the ASCII LiDAR data file.
If you are running in the Terrain Module, from the Terrain Menu select Terrain | Open and select the ASCII LiDAR data file.
Note that the LiDAR data file has to be in one of the formats that we support.
You can then ask RiverCAD to contour this elevation data. In each of the module menu's you will see a Generate Contours command.
If you have any additional questions or need any further information, please contact me again.
Sincerely,
Chris E. Maeder, M.S., P.E.
Senior Technical Engineer
chris.maeder@bossintl.com