|
Re: Maximum Average Velocity at a Cross Section
The only solution i have for you involves copying out data to Excel or similar program and using the Maximum function to determine the highest velocity at a given cross section.
Depending on how long of a time period you are running your model for and how many cross sections you have, this could be a very time consuming process. Hopefully both of these are a reasonable number.
Open the "Standard table 1" output table. Go to options:Profiles and then select all of the profiles. You will now have a large data table.
Copy this data to Excel and using an equation find the maximum value in the column of "vel chnl"
Hope this helps, but note this could be a time consuming process.
|