Inflow in reservoir too large

[Karin&Bethi]

Dear Dambrk users,

To get our model run, we had to increase our inflow in the reservoir from 1,31 m³/s (=realistic conditions) up to 50 m³/s and the lateral inflow further downstream from 10 m³/s (=realistic) up to 100 m³/s.

Now we would like to know how this influences the results?
Should we subtract the 150 m³/s from the peak of the flood wave we get from the results?

We hope anybody can help us!

Thank you in advance and sorry for our english!

Yours Karin & Bethi

[Chris Maeder]

Depending upon how your model is setup, you should be able to get BOSS DAMBRK to handle your model. If you continue to run into difficulties, you can send me your BOSS DAMBRK model and I can see what might be causing the problems you are running into.

Sincerely,

Chris E. Maeder, M.S., P.E.
Senior Technical Engineer
chris.maeder@bossintl.com