Defining cross section data

Dear Chris,

Is it really in such a way, that if I define a cross section I have only the possibility to define 8 elevation points?

Sincerely,

Michael Bätscher
Dipl. Bau-Ing. FH
HSR Hochschule Rapperswil
Abt. Bauingenieurwesen
Oberseestrasse 10
CH-8640 Rapperswil

Tel direkt: +41 55 222 49 77
Fax direkt: +41 55 222 42 66
e-mail: mbaetsch@hsr.ch
Internet: www.bau.hsr.ch <https://webmail.hsr.ch/exchweb/bin/redir.asp?URL=http://www.bau.hsr.ch/>

Dear Michael Bätscher :

Note that DAMBRK requires you to convert the cross section data into equivalent top width data. You can define up to 8 top widths to define the cross section geometry.

If you have any additional questions or need any further information, please contact me again.

Sincerely,

Chris E. Maeder, M.S., P.E.
Senior Technical Engineer
chris.maeder@bossintl.com