BOSS - Dambreak

Chris attached is a dambreak file.

The model is using Option 14. Dynamic routing downstream and level pool upstream of first dam. ( There are two dams, no bridges)

This model works. The results look acceptable.

I would like to see the reservoir depletion table.

I believe I have requested this table but can not locate.

Can you please look at this model. Why no reservoir depletion table?

Dear Joe Kissel :

Reservoir Depletion Tables are only available for Option 1. You will need to break your model into a single reservoir and then re-run the top most portion of your model as Option 1.

If you have any additional questions or need any further information, please contact me again.

Sincerely,

Chris E. Maeder, M.S.
Senior Technical Engineer
chris.maeder@bossintl.com