#1 (permalink)  
Old 07-02-1999, 05:45 AM
Chris E. Maeder
Member
  
Posts: n/a
Re: Controlling output hydrographs?
Dear Joe Kissel :

You can turn on up to 6 output hydrographs in the Cross-Section Description screen. If you have the new BOSS DAMBRK User Manual (available from our website in PDF format), this is described on page 4-22.

If you have any additional questions or need any further information, please contact me again.

Sincerely,

Chris E. Maeder, M.S.
Senior Technical Engineer
chris.maeder@bossintl.com
Reply With Quote
  #2 (permalink)  
Old 07-02-1999, 12:36 PM
Joe Kissel
Member
  
Posts: n/a
Controlling output hydrographs?
Chris, what controls what Hydrographs are plotted and how many hydrographs are plotted for the plot of the "downstream breach hydrographs" in your graphic output.
Reply With Quote
  #3 (permalink)  
Old 07-02-1999, 06:46 PM
Chris E. Maeder
Member
  
Posts: n/a
Re: Controlling output hydrographs?
Chris my question was not clear.

What controls the Combined Discharge Hydrographs plot?

I would like to plot a Combined Hydrograph plot at six hydrographs along a 20 mile reach of river, to show what happen to the hydrograph.
Reply With Quote
  #4 (permalink)  
Old 07-18-1999, 04:34 PM
Chris E. Maeder
Member
  
Posts: n/a
RE: Controlling output hydrographs?
Dear Joe Kissel :

If you define 2 or more hydrograph plots, DAMBRK automatically generates a combined hydrograph plot.

If you have any additional questions or need any further information, please contact me again.

Sincerely,

Chris E. Maeder, M.S.
Senior Technical Engineer
chris.maeder@bossintl.com
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 03:07 AM.