Printing from BOSS DAMBRK

Hello Nicole!. How are you?. I¨m writing again because I'm working with the program but I can´t print graphics. I have problems with configuration printer

There are the problems:
1. My PC is on-line with another computers and the printer is attached to a different computer. We have HPdeskjet 1200MC, HP Láser 4 plus and HP Láser 4si deskjet.
2. When I had install "Epson stylus color 600" directly in my PC, I had print only output results NOT GRAPHICS
3. F1 (Help program) doesn´t have codes from our printers.
4. I need to work every time on-line.

Please, help me, because I have to finish my first project in Bossdambrk
(URGENT)
Sincerely,
Libia Sofía

Dear Libia Sofía :

Note that we support the HP LaserJet you have, either in native mode or as a PostScript printer. You should use the following driver numbers and modes. Note that these are listed in the Output Device Setup on-line help screens.

Hewlett-Packard LaserJet 75h x 75v dpi Driver Number 6 Mode 1
Hewlett-Packard LaserJet 100h x 100v dpi Driver Number 6 Mode 2
Hewlett-Packard LaserJet 150h x 150v dpi Driver Number 6 Mode 3
Hewlett-Packard LaserJet 300h x 300v dpi Driver Number 6 Mode 4
PostScript black/white Driver Number 3 Mode 1
PostScript black/white Driver Number 3 Mode 3

Note that you can also output the graphics as a DXF file, and import into AutoCAD (or similar CAD program) for output. Or, you can write it out as a Windows Graphics Metafile. These are also listed in the Output Device Setup on-line help screens.

If you have any additional questions or need any further information, please contact me again.

Sincerely,

Chris E. Maeder, M.S.
Senior Technical Engineer
chris.maeder@bossintl.com

I received the information, please send me out put device codes to "Epson Stylus COLOR 600" too.

Thank you.
Libia Sofía

Dear Libia Sofía :

We do not support the Epson Stylus Color 600 printer. You could generate a color TIFF file, import that into Microsoft Word, and then print the output from Word.

If you have any additional questions or need any further information, please contact me again.

Sincerely,

Chris E. Maeder, M.S.
Senior Technical Engineer
chris.maeder@bossintl.com