|
Kinematic wave not running properly
I have a problem while running my HEC-HMS 3.0.0 file. In principle the data was introduced as required but I encountered a major problem. I selected 'kinematic wave' as a routing method but I realised that both time and peak flow were identical in both cross sections. For this reason I chose 'Muskinghum' instead and this led me to a more logical result, but the flows obtained in the downstream cross sections were higer than expected.
As I have no option but using 'kinematic wave' I would be very grateful if somebody could help me solving this problem. I suppose it must be a silly mistake.
Thank you in advance!
|
Linear Mode
