HEC-6 question

[zxc]

Hello Everyone,

We have a question about setting up HEC-6 model. We have local inflows and outflows (diversion flow). The model set up as following:

$LOCAL
DIVERSION FLOW
LQL -78001 -99
LTLLOCAL 1.0 1.0
LFL 1.0 1.0
INFLOW
LQL 500 10000 20000 40000 60000 250000
LTTTOTAL 100 2000 5000 12000 17000 30000
LFL VFS .119 .119 .498 .511 .582 0.582
LFL FS .328 .328 .331 .306 .280 0.280
LFL MS .553 .553 .156 .154 .110 0.110
LFL CS .000 .000 .011 .016 .020 0.020
LFL VCS .000 .000 .004 .008 .005 0.005
LFL VFG .000 .000 .000 .004 .002 0.002
LFL FG .000 .000 .000 .001 .001 0.001
LFL MG .000 .000 .000 .000 .000 0.000
LFL CG .000 .000 .000 .000 .000 0.000
LFL VCG .0 .0 .000 .000 .000 0.000
DIVERSION FLOW
LQL -30001 -99
LTLLOCAL 1.0 1.0
LFL 1.0 1.0
DIVERSION FLOW
LQL -13001 -99
LTLLOCAL 1.0 1.0
LFL 1.0 1.0
DIVERSION FLOW
LQL -42001 -99
LTLLOCAL 1.0 1.0
LFL 1.0 1.0
$HYD
* A FLOW
Q 77400 -78000 11000 -30000 -13000 -42000
R 8.73
T 70 70 70 70 70 70
W 2.
$$END

The output file indicate that the program doesn't recognize the diversion cards but only recognize input cards. Is there anything wrong with my input for the diversion flow? Thank you very much for your help.