Export GIS Data, missing geospatially coordinates

[BSB]

I have entered the Geometry Data in Hec Ras (3.1.3). If I make an Export to GIS Data I have the following error message:

"Note - there are 50 cross section(s) in the geometry that are not georeferenced"

The problem is that the XS Schematic Lines (Geometric Data\Edit\XS schematic lines) are not defined.

How can I enter the geospatially coordinates (in XS Schematic Lines) in an efficient way?

Is it at all possible to Export GIS Data from a Hec Ras Project in which there was not an Import of GIS Data?

Thank you!

[John.M]

Hello,

You have to define your "Schematic Plot Extents...". You can go to "Geometric Data\View\Set Schematic Plot Extents.." an click on the "Set to Current View" button. It will automatically create the "Geometry Extents" for your study area.

Hope it will solve your problem!

[AbNormal_Depth]

see reply on other thread.

use the CTRL key in the RAS schematic and digitize the location of where the section should be. then go to the Edit>XS Schematic Lines table and paste the results. you must do this for all sections before the model is georeferenced.