#1 (permalink)  
Old 04-02-2002, 01:58 AM
CEC CEC is offline
Registered User
  
Join Date: Apr 2002
Posts: 1
Converting RMS Hec-Ras to RMS HEC-2
I modeled a reach with Hec-Ras and discovered that I should have modeled the reach with a split flow. I proceeded to change modules from Hec-Ras to HEC-2, with some additional input I thought that I could run HEC-2 with the split flow option. However the program gives the message that HEC-2 Module is not enabled. Anyone have a clue what the problem might be?
Reply With Quote
  #2 (permalink)  
Old 04-02-2002, 03:03 AM
Administrator
  
Join Date: Aug 2001
Posts: 778
Re: Converting RMS Hec-Ras to RMS HEC-2
Doesn't sound like you have purchased the license for the HEC-2 Module. You can contact us directly and we can check our files.

Perhaps the hardware lock license was incorrectly programmed. We can remotely program the hardware lock to enable this module.

Sincerely,

Chris E. Maeder, M.S.
Senior Technical Engineer
chris.maeder@bossintl.com
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 09:20 AM.