Digital Terrain Models in RiverCAD

Your web page reports the use of USGS 7.5-minute DEM (30 x 30 m) and 1-degree DEM (3 x 3 arc-second) in RiverCAD:

"RiverCAD currently supports the two most common flavors of digital elevation model data."

Can you tell me if RiverCAD will accept the following?

* USGS 10 meter DEM
* User Interpolated DEM having smaller cell sizes than USGS 10 meter (e.g., 15 ft cell)
* User Interpolated TIN

Thank you,
James Mawby
SCHOOR DEPALMA

Dear James :

Note that our DEM Module should support the 10m USGS DEM and user interpolated DEM. However, the TIN would not be supported by the DEM Module. You would need to get our DTM Module for that.

If you have any additional questions or need any further information, please contact me again.

Sincerely,

Chris E. Maeder, M.S.
Senior Technical Engineer
chris.maeder@bossintl.com