#1 (permalink)  
Old 09-12-2007, 04:55 PM
Registered User
  
Join Date: Sep 2007
Posts: 0
Junctions
Does RiverCAD allow two reaches to come together at a junction and then continue downstream as a new reach?

Everything I have seen allows multiple reaches, but they all have to be independently defined. Junctions are allowed in Hec-RAS and was just wondering if they were incorporated into RiverCAD.
Reply With Quote
  #2 (permalink)  
Old 09-13-2007, 03:42 AM
Administrator
  
Join Date: Aug 2001
Posts: 752
Re: Junctions
Yes, junctions are in RiverCAD. Select Reach | Junctions. You need to have at least 3 reaches in order to have a junction (as you do in HEC-RAS).

If you don't have the latest RiverCAD, you will need to download it off of our website, at:
http://www.bossintl.com/products/dow.../RiverCAD.html

Let me know if you need any other assistance.

Sincerely,

Chris Maeder, M.S., P.E.
Senior Technical Engineer
chris.maeder@bossintl.com
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 07:05 AM.