Exporting Multiple Reaches to HEC-RAS

[dawid_vancoller]

I am busy modelling a long river in RiverCAD and divided it into 6 reaches.

But after exporting it to a HEC-RAS project, the 6 reaches appear as 6 separate rivers, each with 1 reach, instead of 1 river with 6 reaches.

Any help will be appreciated.

[Chris Maeder]

Note that the current release of RiverCAD exports this as a single HEC-RAS model with multiple reaches. If you have defined your model correctly in RiverCAD so that it analyzes the entire model as a single model, then when you export it to HEC-RAS it will be the same.

You should check to make certain you have the latest RiverCAD. You can download this from here:
http://www.bossintl.com/products/dow...iverCAD.html#0

If you continue to have problems, please send me your RiverCAD drawing file to review.

Sincerely,

Chris Maeder, M.S., P.E.
Senior Technical Engineer
chris.maeder@bossintl.com