Problem whith "Floodplain Map Results"

Cetra · #1 (**permalink**) 10-25-2007, 12:03 PM

We have a little problem, when we use the "Floodplain Map Results" fonction, floods map contours are not continuous along the river, that is not realistic. Could you explain why?
Thank you for your help.

Chris Maeder · #2 (**permalink**) 10-25-2007, 10:48 PM

I can't explain it without first looking at your model. If you can email it to me, I can review it and assist you with it.

Sincerely,

Chris Maeder, M.S., P.E.
Senior Technical Engineer
chris@bossintl.com

Cetra · #3 (**permalink**) 10-26-2007, 07:04 AM

I sent you the project. It's a representation of the decenal flood.
Thank you again for your answer, sincerely,

Chris Maeder · #4 (**permalink**) 10-26-2007, 12:04 PM

You will need to send the RiverCAD DWG file to me as a ZIP. I cannot see the problem on the screen capture that you posted.

Cetra · #5 (**permalink**) 10-29-2007, 07:50 AM

Thank for your reply.

Content on this page requires a newer version of Adobe Flash Player.