#1 (permalink)  
Old 10-26-2007, 05:32 PM
Registered User
  
Join Date: Oct 2007
Posts: 0
HEC-2 conversion
I have been having a difficult time converting two HEC-2 files into HEC-RAS projects. I have just tried using RiverCAD, and was again unsuccessful in reading the geometry in HEC-RAS after the conversion.
I have also never used HEC-2, and am not sure if these data files are functioning.
Reply With Quote
  #2 (permalink)  
Old 10-26-2007, 06:44 PM
Administrator
  
Join Date: Aug 2001
Posts: 751
Re: HEC-2 conversion
I was able to import your two HEC-2 models into RiverCAD and run them. They seem to be functioning. However, if you are needing further technical assistance with these models, you should contact our technical support staff at 800-488-4775.

Sincerely,

Chris Maeder, M.S., P.E.
Senior Technical Engineer
chris@bossintl.com
Reply With Quote
Reply

« Previous Thread | Next Thread »

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 09:27 PM.